Uniden 200 - Manual (Page 14)

E-10
S2 - medium squelch
S3 - maximum (tight) squelch
1. Press
sQuElCh
. S displays and the
current squelch level flashes.
2. Press
sQuElCh
while the squelch level
displays in order to change the squelch
level to the next level.
3. Press and hold
sQuElCh
to save and exit the squelch setting.
The unit beeps twice on exit.
Selecting a Channel
After turning on your radio, press or to
scroll though the channels individually.
1. To select a higher channel, press ▲ .
2. To select a lower channel, press the ▼ .
Press and hold or for more than 1 second
to scroll rapidly through the channel numbers.
Refer to page 18 through page 23 for a list of the
available channels, corresponding frequencies,
and usage guidelines.
Change Channel Mode
Press
UIC
to switch between USA, International,
and Canadian Channel modes.
Transmitting and Receiving
The radio uses U.S., Canadian, and International Marine Channels.
Refer to page 18 through page 24 for a list of the available channels and
corresponding frequencies. The radio’s maximum RF transmit power
is 3.5 W (
HIGH ).
1. Hold the radio with microphone approximately 2 inches in front
of your mouth with the antenna at approximately a 45° angle
away from your head.
2. Speak in a clear, normal conversational voice.
[UP ]
[DOWN ]
HIGH
LO
HIGH
US
US
US