Univex Dual Mono Pre-Main Amplifier AM-77 - Manual (Page 29)

29
- Having entered the ‘Fixed Input’ menu, now select:
Fixed Input 1.55V = +6dBu
or
Fixed Input 0.775V = 0dBu
Warning! By selecting Home Theater Direct mode, the volume of the amplifier will be switched to full.
Hence if it is used incorrectly, it will damage the connecting speakers. AMR assumes no responsibility for
any speaker damage arising from the use of the AM-77.
HTD mode:
always use an
external pre-amp
as this mode will
switch the AM-
77 to full volume!