UNICOM Electric GEP-32008T - Manual (Page 10)

7
4. Network Application
This section provides a sample of network topology in which the MicroGST/5
and 8 switches are used. In general, the MicroGST switches are designed as
high-bandwidth backbone switches.
You can use the MicroGST switches to connect servers, switches,
workstations, and PCs to each other by connecting these devices directly to
the Switch. The Switch automatically learns node addresses, which are
subsequently used to filter and forward all traffic based on the destination
address.
For enterprise networks where large data broadcasts are constantly processed,
this switch is an ideal link between departmental switches and the core switch.
All workstations can connect to departmental switches and those switches are
then connected to the MicroGST/5 and 8 switches. Now all the devices in this
network can communicate with each other. Connecting servers to the core
switch is important because it allows each workstation to access the server’s
data.
This switch is designed for backbone connectivity. In the above example,
servers, department switches, and workstation are directly connected to the
MicroGST switches.