Uniden 1EXI7960 - Manual (Page 16)

SETTING THE PULSE/TONE SWITCH
Be sure the PULSE/TONE switch
is in the TONE position unless
your local phone system uses
pulse dialing.
ADJUSTING THE RINGER AND VOLUME CONTROLS
▼
Handset Ringer Tone and Volume
Your EXI 7960 lets you choose from
two ringer tones, Type A and Type B.
Each tone has a low and high volume
setting. When the phone is in standby
mode, press the
vol
▲ or ▼ key on the handset to select the handset
ringer tone and volume. As you change the settings, the selection appears
on the LCD.
▼
Handset Earpiece Volume
The EXI 7960 comes with four volume settings for the handset earpiece
- normal, medium, high and loud. The Loud setting is especially useful
in places with a lot of background noise, or for the
hearing impaired.
Normal, Medium, High
During a call, press vol
▲ to increase
the earpiece volume, press vol
▼ to
decrease the earpiece volume. As you
increase or decrease the volume, your selection appears on the LCD.
When you hang up, the EXI 7960 keeps the last volume setting selected.
12
TIP
Most phone systems use tone
dialing. Check with your
local phone company if
you’re not sure whether your
system is tone or pulse.
PULSE-T
ONE
Ring Type B
High
<High>
NOTE
You can only adjust the
volume settings during a call.
H:...evised for reprint EXI 7960.vp
Wed Aug 18 12:37:41 1999
Color profile: Disabled
Composite Default screen