Uniden 1EXI7960 - Manual (Page 19)

STORING A PHONE NUMBER IN MEMORY
1) Remove the handset from the base.
2) Press and hold mem for two seconds.
The following screen appears.
3) Use the
: and ; keys or number keypad to choose the memory
location where you would like to enter a number.
4) Press select . The following screen appears,
and a cursor flashes indicating that the
display is ready for the name to be entered.
5) Use the
: and ; keys to scroll through the character menu. Use the
< and > keys to move the cursor to the desired location, and enter the name.
6) If you make a mistake, press delete to erase the character you just
entered. Or press and hold delete to erase the entire line.
7) Press select . The following screen
appears, and a cursor flashes indicating
that the display is ready for the number.
8) Enter the phone number with the handset keypad.
9) Press select. The handset beeps and
displays a confirmation screen. For
example, if you store a name and number
into memory location number one, the
display shows
Memory 1 Stored .
10)Press mem or return the handset to the charging cradle to exit store
mode. Or, wait 20 seconds for the phone to return to standby.
15
HINT
The character menu consists
of letters, symbols, and
numbers.
NOTE
The pause button counts as
one digit. Pressing
pause
more than once increases
the length of pause between
numbers.
NOTE
Whenever you are using a
menu screen, you must press a
key within 20 seconds or the
phone will return to standby.
You may also press
mem to
exit a memory menu at any
time.
Memory Store
1>
2
Store Name
❚
Store Number
❚
NOTE
When entering numbers, press
pause
to enter a
pause in the dialing sequence. The display shows
a P. The pause feature is useful for long distance
calling, credit card dialing, or sequences requiring
pause between digits.
Memory 1 Stored
H:...evised for reprint EXI 7960.vp
Wed Aug 18 12:37:46 1999
Color profile: Disabled
Composite Default screen