Uniden 1EXI7960 - Manual (Page 21)

9) Press select. The handset beeps and
displays a confirmation screen. For
example, if you store a name and number
into memory location number one, then
the handset shows Memory 1 Stored .
10)The display then returns to the Memory Store screen. You may select
another number to edit (return to step 3) or you may press mem to
return to standby.
ERASING A NUMBER FROM MEMORY
Use these steps to erase a programmed number from memory. Once a
number is erased, that memory location may be programmed with a
new number.
1) Remove the handset from the base.
2) Press and hold mem for two seconds.
The handset shows the Memory Store
screen with any saved numbers displayed.
3) Use the
: and ; keys or number keypad to select the memory
location you would like to delete. The
< and > keys toggle between the
names display and the numbers display.
4) Press select . The following screen
appears with the memory location
number that you have selected in
the display.
5) Use the
; key to move the > cursor
down to the Delete Memory command.
6) Press select . The following confirmation
screen appears.
7) Use the
: key to move the > cursor to the Yes command.
17
NOTE
If you select Go Back
at any time, no changes are
made and the handset shows
the Memory Store screen.
NOTE
If you select No, no changes
are made and the handset
shows the Memory
Store screen.
Memory 1 Stored
Memory Store
1> KAYSIE SCHLITZ
2 UNIDEN
> Edit Memory 1
Delete Memory 1
Go Back
Edit Memory 1
> Delete Memory 1
Go Back
Delete Memory?
Yes
> No
H:...evised for reprint EXI 7960.vp
Wed Aug 18 12:37:49 1999
Color profile: Disabled
Composite Default screen