UNICOM Electric 802.11b+g - Manual (Page 25)

- 22 -
Advanced Setting
User Interface
Language
Select English or Traditional Chinese.
Power Consumption Setting
Continuous Access Mode
(CAM)
When this mode is selected, the power supply will
be normally provided even when there is no
throughput.
Maximum Power-Saving
Mode When this mode is selected, this device will stay in
power saving mode even when there is high volume
of throughput.
Fast Power-Saving Mode When this mode is selected, the power mode will
switch between CAM and Maximum Power-Saving
Mode depending on the volume of throughput. The
device driver checks the total bytes (only data
frame) every 4 seconds to decide the power mode.
If the total bytes sent exceed 10k bytes, the device
driver will choose “CAM”. If the total bytes are
less than 10k bytes, however, the device driver will
choose “Maximum Power-Saving Mode”.