UNICOM Electric 802.11b+g - Manual (Page 28)

- 25 -
Network Adapter
You can select the network adapter from the
pull-down menu, it shows the device itself（the
802.11g Wireless LAN USB Adapter） and also
shows the devices supported by the 802.11g
Wireless LAN USB Adapter.
Connection Station List It shows the stations which are now connecting
to the AP.
Channel Shows the selected channel that is currently in
use. (There are 14 channels available, depending
on the country.)
SSID The SSID is the unique name shared among all
points in your wireless network. The name must
be identical for all devices and points attempting
to connect to the same network.
It shows the current SSID setting of the
Wireless USB Adapter.
WEP The WEP function here has been disabled. If you
want to change to Enabled, click More
Setting… to configure.
Tx Power The Tx power here is configured as Level 0, to
change the Tx power, click More Setting… to
configure.
More Setting… Click the More Setting… button and the
following figure will appear for you to configure
（
Refer to the More Setting… part on the next
page for more information about this figure.）