UNICOM Electric SmartGST-2402M - Manual

UNICOM SmartGST-2402M
1
Introduction
Unicom’s new 24 Port SmartGST-2402M is a high-speed, professional-grade
managed Fast Ethernet switch that provides wire-speed, a Fast Ethernet switching
technology that allows high-performance, low-cost connections up to Full-Duplex,
100Mbps Fast Ethernet networks. The SmartGST-2402M switch is a store-and-
forward device that offers low latency for high-speed networking and features an
expansion slot for an optional 1000Base-T/SX/LX module. It is ideal for workgroup,
department, or backbone environments.
Figure 1-1. The SmartGST-2402M
Features
■ Conforms to IEEE 802.3, 802.3ab, 802.3ad, 802.3u, 802.3z, 802.1d, 802.1p,
802.1Q, and 802.3x standards
■ 24 auto-sensing 10/100Mbps Ethernet RJ-45 ports
■ Automatic MDI/MDIX crossover for 10Base-T and 100Base-TX ports
■ One Expansion Slot for 2 Port 1000Base-SX, 1000Base-LX, or 1000Base-T
modules ( Optional )
■ N-way Auto-negotiation supported
■ Back-Pressure-Base flow control on Half-duplex link mode
■ Pause-Frame-Base flow control on Full-duplex link mode
■ Store-and-forwarding switching architecture for abnormal packet filtering
■ Back Plane 8.8G