UNICOM Electric SmartGST-2402M - Manual (Page 66)

UNICOM SmartGST-2402M
65
_Basic
Create a VLAN and add tagged member ports to it.
1. .From the main menu, click administrator VLAN configuration, click Add as below.
2. Type a name for the new VLAN.
3. Type a VLAN ID (between 2-4094). The default is 1.
4. Choose the protocol type. Default is NONE.
5. From the Available ports box, select ports to add to the switch and click “Add >>”. If
the trunk groups exist, you can see it in here (ex:TRK1,TRK2…) and you can
configure it whether it is a member of the VLAN or not.
6. Click Next.