Led indicators, Unicom smartgst-2402m, Led status description – UNICOM Electric SmartGST-2402M User Manual
Page 6
UNICOM
SmartGST-2402M
5
2
4
6
8
1
3
5
7
10
12
14
16
9
11
13
15
18
19
22
24
17
19
21
23
Console Port
LED Indicators
10/100Base-TX RJ-45 ports
Module slot
Figure 2-1. The Front panel of
SmartGST-2402M
RJ-45 Ports ( Auto MDI/MDIX ): Twenty-four 10/100 N-way auto-sensing
connections for 10Base-T or 100Base-TX.
Module Slot: There are three types of 2-port expansion Module available for the
SmartGST-2402M, ( 1000Base-SX, 1000Base-LX, 1000Base-T ).
LED Indicators
The LED Indicators give real-time information of systematic operation status. The
following table provides descriptions of LED status.
Figure 2-2. LED indicators
LED
Status
Description
Green
Power On
Power
Off
Power is not connected
Green
The port is connecting with the device.
Blinks
The port is receiving or transmitting data.
LNK/ACT
Off
No device attached.
FDX/COL
Yellow
The port is operating in Full-duplex mode.