Technical specification, Specifications – UNICOM Electric SmartGST-2402M User Manual
Page 81
www.unicomlink.com
UNICOM
80
Technical Specification
This section below provides the specifications of the SmartGST-2402M.
Specifications
Standard
IEEE802.3 10BASE-T
IEEE802.3u 100BASE-TX/100BASE-FX
IEEE802.3z Gigabit SX/LX
IEE802.3ab Gigabit 1000T
IEEE802.3x Flow Control and Back pressure
IEEE802.3ad Port Trunk
IEEE802.1d Spanning Tree Protocol
IEEE802.1p Class of service
IEEE802.1Q VLAN Tagging ANSI/IEEE 802.3 N-Way
Auto-negotiation
LED Indicators
Per Unit: Power
Per UTP Link/Active, Full-duplex/Collision
Per Gigabit Fiber: Link/ Activity
Per Gigabit Copper: Link/Activity, Full Duplex,
100Mbps, 1000Mbps
Per 100FX module: Link/Activity, Full Duplex
Connector
10/100TX: RJ-45
100FX(Multi /Single Mode fiber) module: SC
2 port Gigabit SX/LX module: SC
2 port Gigabit 1000T module: RJ-45
Switch
architecture
Store and Forward, Back-plane 8.8 Gbps
MAC address
6K Mac with Auto Learning
Memory
3Mbits for packet buffer
Dimensions
440mm(W) x 225mm(D) x 44.5mm(H)
Storage Temp.
-40
o
C to 70
o
C ( -40
o
F to 158
o
F)
Operational
Temp.
0
o
C to 45
o
C ( 32
o
F to 113
o
F )
Operational
Humidity
10% to 90% (Non-condensing)