UNICOM Electric SmartGST-2402M - Manual (Page 22)

UNICOM SmartGST-2402M
21
4-3-4-2. Create a VLAN Group
_Create Port-Based VLAN
Create a port-based VLAN and add member/nonmember ports to it.
Select <Edit>.
VLAN Name: Type a name for the new VLAN.
Group ID: Type the VLAN group ID. The group ID range is 1 ~ 4096.
Member: Press Space key to choose VLAN member. There are two choices:
Member: The port is a member port.
NO: The port is NOT a member port.
Press “ESC” to go back to the action menu line.
Select <Save> to save all configured values.
NOTE: If a trunk group exists, you can see it (ex: TRK1, TRK.) after port 26 and configure it
whether it is a member of the VLAN or not.