UNICOM Electric SmartGST-2402M - Manual (Page 56)

UNICOM SmartGST-2402M
55
Note: It is suggested that the VOD server switch have the smallest IP address.
5-4-3. Console Port Information
1. Console is a standard UART interface to communicate with the Serial Port.
User can use the Windows HyperTerminal program to link to the switch. Connect
To->Configure
Bits per seconds: 9600
Data bits: 8
Parity: none
Stop Bits: 1
Flow control: none
5-4-4. Port Controls
This page changes each port’s status.
1. State: User can disable or enable this port control.
2. Negotiation: User can set auto negotiation mode to Auto or Nway (specify the
speed/duplex on this port and enable auto-negotiation) Force per port.
3. Speed: User can set 100Mbps or 10Mbps speed on Ports 1 ~ 24.
4. User can set 1000Mbps, 100Mbps or 10Mbps speed on Ports 25 ~ 26 (depends on
module card mode).
5. Duplex: User can set full-duplex or half-duplex mode per port.