UNICOM Electric SmartGST-2402M - Manual (Page 64)

UNICOM SmartGST-2402M
63
5-4-7-1. Port Based VLAN
1. Click Add to create a new VLAN group.
2. Enter the VLAN name, group ID and select the members for the new VLAN.
3. Click Apply.
4. If there are many groups that exceed the limit of a single page, you can click the
“NextPage” to view other VLAN groups.
NOTE: If the trunk groups exist, you can see it (ex: TRK1, TRK2, etc.) in the menu of ports.
You can configure it whether it's a member of the VLAN or not.