UNICOM Electric SmartGST-2402M - Manual (Page 32)

UNICOM SmartGST-2402M
31
4-4-1-3. Perport Configuration
1. State: Display spanning tree status for the switch: whether each port is forwarding or
blocking.
2. Select <Edit>.
3. PathCost: Specifies the path cost of the port that the switch uses to determine
which ports are the forwarding ports.
4. Priority: This means port priority. You can make it more or less likely to become the
root port.
5. Press ESC to go back to the action menu line.
6. Select <Save> to save all configure values.
7. On the action menu line you can press <Next Page> to configure port 9 ~ port 26
8. Press <Previous Page> to return to last page.