UNICOM Electric SmartGST-2402M - Manual (Page 47)

www.unicomlink.com UNICOM
46
3. Select “send file" under the "transfer" menu from the menu bar.
4. Press the "browse" button to select the path.
5. Select "1K Xmodem" for protocol and press the "Send" button.
6. After successfully upgrading the new firmware, re-modify the baud rate to 9600bps.
5. Web-Based Management
This section introduces the configuration and functions of the Web-Based
management feature.
About Web-based Management
Inside the CPU board of the switch, there exists an embedded HTML web site
residing in flash memory. It offers advanced management features and allow users
to manage the switch from anywhere on the network through a standard browser
such as Microsoft Internet Explorer.