UNICOM Electric SmartGST-2402M - Manual (Page 75)

www.unicomlink.com UNICOM
74
5-4-13-2. TFTP Backup Configuration
Use this page to set TFTP server IP address. You can save the current EEPROM value
here and then go to the TFTP restore configuration page to restore the EEPROM value.
5-4-14. Factory Default
Reset Switch to default configuration.
Default IP address: 192.168.16.1
Default Gateway: 192.168.16.254
Subnet mask: 255.255.255.0
The other setting value is either Disable or None.
5-4-15. Reboot
Reboot the Switch in software reset.