UNICOM Electric SmartGST-2402M - Manual (Page 74)

UNICOM SmartGST-2402M
73
5-4-12-3. Miscellaneous Configuration
■ Quiet period: Sets the period during which the port doesn’t try to acquire a
supplicant.
■ Tx period: Sets the period the port waits to retransmit next EAPOL PDU during an
authentication session.
■ Supplicant timeout: Sets the period of time the switch waits for a supplicant
response to an EAP request.
■ Server timeout: Sets the period of time the switch waits for a server response to an
authentication request.
■ Max requests: Sets the number of authentications that must time-out before
authentication fails and the authentication session ends.
■ Reauth period: Sets the period of time after which clients connected must be re-
authenticated.
5-4-13. TFTP Update Firmware
The following menu options provide system control functions that allow a user to update
firmware and remotely boot the switch system:
* Install TFTP Turbo98 and execute.
* Copy firmware update version image.bin to TFTP Turbo98 directory.
* In Web Management, select administrator—TFTP update firmware.
■ Download new image.bin file then press <update firmware>.in Web Management
■ *After update is finished, press <reboot> to restart switch.
5-4-13. Configuration Backup
5-4-13-1. TFTP Restore Configuration
Use this page to set the TFTP server address. You can restore EEPROM values from
here, but you must put back an image in the TFTP server. Switch will download flash
image.