UNICOM Electric SmartGST-2402M - Manual (Page 62)

UNICOM SmartGST-2402M
61
5-4-6-3. MAC filtering
MAC address filtering allows the switch to drop unwanted traffic. Traffic is filtered based
on the destination addresses.
1. In the MAC Address box, enter the MAC address that you want to filter.
2. If tag-based (802.1Q) VLANs are set up on the switch, in the VLAN ID box, type the
VID associate with the MAC address.
3. Click Add.
4. To delete a filter, choose the MAC address that you want to delete and then click
Delete.
5-4-7. VLAN configuration
A Virtual LAN (VLAN) is a logical network grouping that limits the broadcast domain. It
allows you to isolate network traffic so only members of the VLAN receive traffic from
the other members of the same VLAN group. Basically, creating a VLAN on a switch is
the equivalent of reconnecting a group of network devices to another Layer 2 switch.
However, all the network devices are still plugged into the same switch.
The SmartGST-
2402M supports port-
based, 802.1Q
(tagged-based), and
protocol-based VLAN
in the web
management page.