Uniden UH044SX User Manual
Page 13
Example. CH40 becomes active
If the received signal cease, the unit will wait for
at least 3 seconds for the signal to return,
otherwise scanning resumes.
To skip the active channel, press
momentarily. Scanning resumes.
To deactivate SCAN, press the
or
.
Note:
1. If SCAN is deactivated while in an active channel, the UH-044 will stay on that
active channel. If no other channels are active, the UH-044 will reinstate the
starting channel.
2. If OS Scanning is initiated when there are no channels programmed in OS
memory, an error tone will be heard and scanning will not start.
3. Press and hold
will switch to Group Scanning.
2. Group Scan (GS) Mode
GS
SCAN
To use GS Mode Scanning, press and hold the
key.
icon appears on the display.
1. When
SW is pressed
during Group Scan Mode,
icon will blink
and Group Scan Scanning begins.
2. To deactivate GS scan, press
or
.
Note:
1. If SCAN is deactivated while it is tuned to an
active channel, the UH-044 will stay on that active
channel. If none of the channels are active, the
UH-044 will reinstate the Priority channel.
2. If GS Scanning is initiated when there are no
channels programmed in GS memory, an error
tone will be heard and scanning will not start.
3. Press and hold
will switch to Open Scanning.
10
scan
scan
scan
tx
pwr
os/gs
tx
pwr
os/gs
tx
pwr
os/gs
PTT
PTT
mem
mem
dup
scan
tx
pwr
os/gs