Uniden UH044SX - Manual (Page 15)

DROP-OUT DELAY
While scanning, the stops at a busy channel and receives a
transmission. When the received signal is over, the unit will wait for 3 seconds
for the return of the signal, otherwise, the radio resumes scanning.
UH-044
POWER SAVE
Battery Save feature extends the battery life by switching the receiver circuit
power ON and OFF. This feature automatically activates during stand by mode
(RX mode without signal). It turns OFF automatically when a signal is present,
and activates again after channel inactivity.
KEYPAD CONFIRMATION TONE
Assures the user that the keypad has been
properly pressed by emitting a beep tone. This
tone can be switched on or off.
1. Press and hold button for 1 sec
will appear for 1.5 secs and you will hear a
beep sound.
2. Press and hold button for 1 sec
will appear for 1.5 secs.
“bp on”
“bp of”
mem
dup
scan
tx
pwr
os/gs
12
scan
scan