Uniden UBW2101 - Manual (Page 8)

8
Step 2: Basic Operation (cont’d)
1) Battery Indicator
Green LED: Battery charging; charge battery until green LED turns off.
Red LED: Battery low (portable mode); camera will turn off within 3 minutes.
Connect the power adapter for charging or continuous use.
LED off: Battery fully charged.
2) Link Indicator
Flashing LED: Pairing sequence is in process. See Advanced Operation -
Pairing Camera section as a guide.
Blue LED: Camera is picked up by the LCD monitor.
LED OFF: Camera is in stand-by mode.
3) Power Indicator
LED turns ON when camera is powered ON.
4) Power / Lullaby Play Switch
Slide down once to power ON the camera. To power OFF, slide down and
hold the switch for 2 seconds, until the power indicator turns off. After power
on; slide down to turn on the lullaby play of the camera, slide & hold ~2-3
seconds to turn off.
5) Link Button
Press to pair the camera with the LCD monitor.
See Advanced Operation - Pairing Camera.
II. Get to Know the LCD Monitor
1) Battery Indicator
Green LED: Battery charging; charge the battery until the green LED turns
off.
Red LED: Battery low (portable mode); monitor will turn off within 3 minutes.
Connect the power adapter for charging or continuous use.
LED off: Battery fully charged.
2) Power Indicator
LED turns ON when monitor is powered ON.
# LED remains ON while LCD display is OFF in Power Save mode.
B S
U
10
9
8
6
5
4
3
2
7
1