Uniden TRU 346 - Manual (Page 22)

T E L E P H O N E F E A T U R E S [ 20 ]
M Meem mo orryy d diiaalliin ng g ffrro om m ttaallkk m mo od dee
1 Press .
“ T a l k “ and the volume setting appear
on the display.
2 Press .
3 Enter a two-digit number (01 - 20) to
select the memor y location of the desired
phone number.
The selected phone number is displayed.
Then the number is dialed.
Chain Dialing
On cer tain occasions af ter dialing a number, you may be requested to enter
an access code, such as your account number. You can enter this number into
a memor y location for later use by doing the following:
1 Store the access code into one of the memor y locations (01-20) following
the steps on page 17.
2 Dial the par ty or service main number.
3 When you need to enter the special number, press
followed by the
memor y location (01-20).
If you select a memory
location that does not
have a stored number,
the handset will beep
rapidly and the phone
will not dial.
TRU346 8/9/00 12:36 Page 20