Uniden TRU 346 - Manual (Page 28)

C A L L E R I D F E A T U R E S [ 26 ]
Caller ID
You must subscribe to Caller ID service to use this feature.
When the telephone rings, the Caller ID feature allows you to view the
caller´s name and phone number on the display before you answer the phone.
The handset displays the phone number of the incoming call, the name, time,
and the number of calls. Additionally, you can dial the displayed number and
store the information for memor y dialing.
SSeettttiin ng g CCaalllleerr IID D o op pttiio on nss
There are three Caller ID setup options available; they are AutoTalk, CIDCW
(Caller ID on Call Waiting), and Area Code.
A Au utto oTTaallkk allows you to answer the phone without pressing . If the phone
rings when AutoTalk is on, simply remove the handset from the base and the
phone automatically answers the call. Or, if the handset is not on the base,
press any key to answer the call. If the phone rings when AutoTalk is of f, you
must press
to answer the call.
CCaalllleerr IID D o on n CCaallll W Waaiittiin ng g ((CCIID DCCW W)) per forms the same as regular Caller ID on a
call waiting number. Call Waiting options allow you to handle call waiting
calls in seven dif ferent ways. (See page 35.)
If you enter a 3-digit area code number in the A
Arreeaa CCo od dee option, your local
area code does not appear in Caller ID messages. When reviewing Caller ID
messages, you will see only the local seven digit number. For calls received
from outside your local area code, you will see a full 10-digit number.
If your calling area requires 10-digit dialing, do not program this option.
You must subscribe to
Caller ID on Call Waiting in
order to use this feature.
TRU346 8/9/00 12:37 Page 26