Uniden BR330T - Manual (Page 112)

112
On The scanner searches for and displays any
subaudible tone found.
Off The scanner does not search for subaudible
tones.
Note: This feature does not operate when the scanner
is in AM/WFM modulation mode.
Screening Out Broadcast Sources
Srch/CloCall Opt
Broadcast Screen
This setting determines whether the scanner
automatically ignores transmissions found during
Custom Search, Service Search, or Close Call
operation that are on common broadcasts, paging
systems, and other annoyance radio sources.
Note: Broadcast screen is not effective during some
service searches.
Set All Band On - turns on broadcast screen on
each band.
Set All Band Off - turns off broadcast screen on
each band.
Set Each Band - lets you set broadcast screen only
on specific bands you select. On or Off appears next
to each option. Turn the scroll control to select an
option then press the scroll control to change the
setting.
• Pager - the scanner skips known paging
system frequencies.
• AM - the scanner skips known AM frequencies.
• FM - the scanner skips known FM frequencies.
• UHF TV - the scanner skips known UHF TV
frequencies.
• VHF TV - the scanner skips known VHF TV
frequencies.
Menu