Uniden BR330T - Manual (Page 41)

41
Setting Up Your Scanner
- appears to show signal strength (0 to 5).
REP - appears when repeater find is turned on.
Using Menu
Press on the left side of the scanner to enter the
menu. See “Using the Menu” on Page 49 for more
information about the scanner’s menu options.
Using Func
To select the function labeled below a key on the front
of the scanner, hold down
on the left side of the
scanner, then press that key. To hold on a system
while scanning or temporarily stop on a channel while
searching, press
. To select a system in Scan or
Scan Hold mode, hold down and rotate the scroll
control.
Func
Menu
Menu
Func
Func
Func