Universal Electronics MILLENNIUM 3 - Manual (Page 22)

SEARCHING FOR YOUR CODE
If your TV,VCR, or Cable Converter does not respond to
the Millennium 3 after trying all of the codes listed for
your brand, or if your brand is not listed at all, try search-
ing for your code.
For example, to search for a code for your TV:
1. Turn on your TV.
2. On the Millennium 3, press and hold SETUP
until the LED blinks twice, then release SETUP.
3. Enter 9 - 9 - 1. The LED will blink twice.
4. Aim the remote control at the the TV and slowly
alternate between pressing
▲ ▲ and TV.
Stop when the TV turns off.
NOTE: In the search mode, the Millennium 3 will
send IR codes from its library to the selected compo-
nent, starting with the most popular code first.
5. Press SETUP once to lock in the code.
6. To search for the codes of other components,
repeat steps 1 through 5, but substitute the
appropriate key (i.e., VCR or CBL) for the (VCR
or Cable) component you are searching for.
22
Millennium 3 Mnl M3090 8/16/99 9:26 AM Page 22