Universal Electronics MILLENNIUM 3 - Manual (Page 7)

INSTALLING BATTERIES
1. On the back of the Millennium 3, push the tab
and lift off the battery cover.
2. Obtain two (2) fully-charged AA alkaline bat-
teries. Match the + and – marks on the batter-
ies to the + and – marks in the battery case,
then insert the new batteries.
3. Press the battery cover back into place. The tab
should click when the cover is locked.
4. Test the unit by any mode key (e.g. VCR, TV, or
CBL). If the batteries are inserted correctly, the
LED will blink once.
NOTE: Whenever batteries need replacement, the Millennium 3
will blink twice with every key press. Simply replace the batteries
and the Millennium 3 will be restored to its full functionality,
complete with your favorite settings.
7
❶
❸
❷
Millennium 3 Mnl M3090 8/16/99 9:26 AM Page 7