Unitech PT-500 - Manual (Page 16)

15
??
The PT-500 can execute user-developed
applications under Application Mode. Applications
will share the configuration settings and files of
the system. After the execution of an application,
the PT-500 returns to the Ready Mode.
The following sections will guide you through the operation
functions and features of the PT-500. They include
descriptions and charts to help you operate your terminal.
3.1 Ready Mode
On starting up the PT-500 for the first time, the LCD will
display:
This indicates that the memory (RAM) of the PT-500 needs
to be formatted. Press both [EXIT] and [ENTER]
simultaneously to format RAM. The LCD will then display:
Note: Once RAM is formatted, all existing data will be lost.
Press [ENTER] for YES or [SP] for NO to confirm your
selection. After RAM is formatted, the system will restart
and display:
Sys Error: xxxx
to Reset
Press EXIT & ENTER
All data will be
LOST after reset!
Are you sure? (Y/N)
PT-500 v1.0
1024KB Total
1012KB Free
>