Unitech PT-500 - Manual (Page 21)

20
3. COMM MENU
Select [3-COMM] to change the settings of the
RS232 port.
Press [SP] to change the setting.
Press [Enter] to confirm the setting and continue to
the next selection.
Press [EXIT] to abort the last change and exit to the
previous menu.
4. BEEP MENU
Select [4-BEEP] to adjust the volume of the beep.
Press digit 1 to 4 to select your beep volume.
Press [Enter] to test the selected volume.
Press [EXIT] to return to previous menu.
5. FNKY MENU
Select [5-FNKY] to change the shortcut function key
settings and create user-defined function keys.
< COMM MENU >
Baud Rate 9600
< BEEP MENU >
1-None 2-Low
3-Med 4-Hi
< FNKY MENU >
1 - F1 2 - F2
3 - F3 4 - F4