Unitech PT-500 - Manual (Page 22)

21
There are four user-definable function keys, F1 to F4.
Under Ready Mode, pressing one of them will
automatically perform a series of keypad inputs. The
default settings for the function keys are:
F1 [MENU]111
F2 [MENU]22
F3 [MENU]23
F4 [MENU]26
For example, pressing F1 under the Ready Mode, will
perform the same as if you were to press the four
keys [MENU] 1 1 1 sequentially. In this case, EzJob
will start and will accept data input.
Select 1 to 4 to select the corresponding function key
and enter the keystroke sequence. For example,
typing 1 will select function key F1. Then enter the
desired keystrokes.
Note: Any pressed key will become part of the
shortcut input except F1 through F4 because those
shortcut keys cannot be nested. During the shortcut
input, keys F1 through F4 are only used to confirm or
abort the shortcut settings and/or exit.
F1 Reset settings to Factory Default
F2 Clear the fields for new input
F3 Abort any changes and Exit
F4 Save settings and Exit
< FNKY MENU >
Define F1
?
111 .