Uniden BT109 User Manual
Page 10
10
If...
Try...
The headset paired with
my phone, but I can’t hear
anything through it.
Making sure the call connected and is still active.
Making sure the phone transferred the call to the headset. Press
and hold Power for two seconds to transfer the call.
-
-
The headset keeps beeping,
and I don’t know why.
The battery may be getting low. If the LED is blinking red, charge
the battery.
Seeing if your phone has lost the network signal. If your phone
sounds an alert when it can’t connect to the network, the headset
passes on this alert by beeping every 5 seconds.
-
-
I can hear the caller, but the
audio is very weak or soft.
Turning the speaker volume up.
Moving closer to your phone (if you aren’t carrying it).
Adjusting the ear cushion to find your “sweet spot” (see page 6).
Keeping the battery fully charged; As the battery starts to run out,
the speaker gets softer.
-
-
-
-
General Information
You cannot use the headset while it is recharging.
Bluetooth wireless devices have a maximum range of 30 feet (10 m); the actual range will vary
depending on current conditions (obstacles, battery power, interference, etc.).
•
•