Uniden BT109 - Manual (Page 8)

8
Available Features
After the headset is connected, you can use the following features:
Make a call
Just make the call from your mobile phone as usual; your phone should
automatically send the call to the headset. If your phone doesn’t, press and hold
Power for 2 seconds to send the call to the headset manually.
Answer a call While the call is ringing, press Power.
Hang up Press Power.
Send a call back
to your phone.
During a call, press and hold Power for 2 seconds. The headset sends the call to
your phone and disconnects from the phone.
Reject an
incoming call
Press and hold Power for 2 seconds; when you hear a beep, release the button.
Redial the last
number
Press and hold Volume Down; when you hear 4 beeps, release the button.
Activate voice
dialing
With the phone in standby, press Power and release. When you hear a beep,
start using your phone’s voice commands. (Your phone must support voice
dialing, and all commands must be pre-programmed.)