Unified Brands TAKU Premier Ventilation - Manual (Page 9)

Installation Instructions
Side Skirts
TOP ENCLOSURES
INSTALLATION OF
ENCLOSURE PANELS
(See Fig. 7-9)
PIECES PROVIDED
Enclosure panels are provided for exposed side(s) of hood(s).
1. Hoods ordered with enclosure panels will be shipped with threaded metal studs
installed on perimeter of hood top where panels are to be installed. Retaining nuts
and washers are installed on the studs prior to shipping.
2. Loosen nuts on studs. Slide enclosure panel under loosened nuts. Holes in panels
are open on end so nuts do not have to be removed.
3. If enclosure panels are installed on one or more hoods butted end to end, the butting
ends of the front enclosure panels should be bolted together.
Figure 7
B
A B
A
Figure 8
ENCLOSURE TOP
HOOD TOP
T-MOLDING
HOOD FRONT
Figure 9
ENCLOSURE
SIDE
ENCLOSURE TOP
9