Uniden CXA 15698 - Manual (Page 24)

23
If.you.make.a.mistake.while.entering.a.name
Use [ /tone/ ] or [#/ ] to move the cursor to the incorrect character.
Press [delete/channel] ([ ] (delete) on the base) to erase the wrong character. Then enter the correct
character. To delete all characters, press and hold [delete/channel] ([ ] (delete) on the base).
5) STORE NUMBER is displayed. The cursor flashes indicating that the phone is ready for
the number to be entered.
6) Use the keypad to enter the phone number; each number can be up to twenty digits. If
you need the phone to pause during the dialing sequence, press [redial/pause] to insert
a two-second pause between the numbers. You can enter multiple pauses to increase the
delay. Each pause counts as a digit. The display shows a P for every pause.
7) Press [select/int’com] ([set] on the base). You will hear a confirmation tone, and the
following screen appears. Memory storage is complete.
8) After about two seconds, the following screen displays all the speed dial memory entries.
9) Press [end] ([ ] (play/stop) on the base) to exit memory setup mode. The phone
returns to standby.
Note: When storing numbers into memory, if the base or cordless handset is idle (i.e., no key is
pressed) for more than thirty seconds, it will beep rapidly, and the phone will return to standby.
Store Number Store Number
Store Number
8007303456
Store Number
8007303456
Memory 1 Stored Memory 1 Stored
1 Movies
2 JOHN DOE
3 MOM AND DAD
1 Movies
2 JOHN DOE
3 MOM AND DAD