Uniden CXA 15698 - Manual (Page 59)

58
Symptom Suggestion
The Caller ID does not display.
• The call was answered before the second ring.
• The call was placed through a switchboard.
• Charge the cordless handset.
• Your Caller ID service may not be active; contact your local telephone
service provider.
The answering machine does not
work.
• Make sure the AC adapter is plugged into wall outlet.
• Make sure the answering machine is turned on.
The answering machine does not
record any messages.
• Set the record time to either the one minute or four minute option.
• The memory may be full. Delete some or all of the saved messages.
Messages are incomplete.
• The incoming messages may be too long. Remind callers to leave a brief
message.
• The memory may be full. Delete some or all of the saved messages.
After a power failure, the outgoing
message is deleted.
• Record your personal outgoing message again. The default message
should remain.
No sound on the base speaker
during call monitoring or message
playback.
• Adjust the speaker volume on the base unit.
• Make sure the call screen feature is set to on.
Cannot access remote call-in
features from another touch-tone
phone.
• Make sure you’re using the correct PIN code.
• Make sure that the touch-tone phone you’re using can transmit the tone for
at least two seconds. If it cannot, you may have to use another phone to
access your messages.