Chapter 3: remote control direct access, Power, Light – VIEWSONIC Precision VS11856 User Manual
Page 16
Chapter 3: Remote Control direct access
Power
Power button to turn on or off the projector.
Power ON
Press
on the remote control/top panel to turn
on projector.
Power OFF
Press
on the remote control/top panel, it would
pop up a confirmation screen showing:
“Press Power Button Again to power off.”
Once this confirmation pops up, Press
on the
remote control/top panel again to turn the power off.
After lamp cooling cycle is completed, the unit will
enter Stand-By mode.
Cancel Power
OFF
Press
on the remote control to cancel the
power off process, once this confirmation pops up.
Light
To illuminate remote control key pad backlight.
Light ON, no
action
Press
on the remote control to illuminate the
remote control keypad backlight. Backlight will
automatically switch off after 10 seconds, if no
other key is pressed.
Light ON, action
Press any remote control key will illuminate the
keypad backlight and calls up the function at the
same time.
Backlight will automatically switch off after 10
seconds, if no other key is pressed.