VIEWSONIC Precision VS11856 - Manual (Page 31)

ENG
ADVANCED OPERATION

2-2-4 Noise Reduction
HQV technology reduces the irrelevant or noise data (Minimum loss of good data) from
signal and creates better viewing quality.
Use ▲ and ▼ to navigate Selections of Noise Reduction Sub-Menu (Fig. 2-2-4).
Press to confirm the Sub-Menu selection.
Press to go to previous menu.
HQV-NR
ON
TNR
0
MNR
2
BAR
OFF
Fig. 2-2-4
Noise Reduction Sub-Menu
HQV-NR
OFF ON
To turn On or Off HQV-noise reduction. HQV NR is a per-
pixel motion & noise adaptive temporal filter.
TNR LOW OFF MEDIUM HIGH
Temporal Recursive Noise Reduction: Filter out the differences by
comparing multiple image frames. This technique works best with still
image.
Press ► to further reduce noise; press ◄ to restore the original state
MNR LOW OFF MEDIUM HIGH
Mosquito Noise Reduction: Reduce noise artifacts around object
edges.
Press ► to further reduce noise; press ◄ to restore the original state
BAR
OFF ON
Block Artifact Removal: Remove block artifact caused by motion
image processing.
Select ON to remove artifacts; OFF to restore the original state