VIEWSONIC Smart Display VSD220 - Manual (Page 33)

Using Your VSD220 Smart Display
23
4.6.1 Turn on Bluetooth and make the device discoverable
1
Touch the Home button │ Apps button │ Settings │ Bluetooth.
2
Enable the Bluetooth function by touching “ ON” to turn on Bluetooth.
The Bluetooth icon appears in the status area of the system bar.
4.6.2 Pair with a Bluetooth device
1
Touch the Home button │ Apps button │ Settings │ Bluetooth. Ensure
Bluetooth has been enabled on the device you want to pair with, and
the device is in Discoverable state.
2
Touch SEARCH FOR DEVICES. Your device starts to scan for
Bluetooth devices within range and then displays all detected devices
below the AVAILABLE DEVICES list.
3
Detect more devices, touch Scan for devices.
4
Initiate a connection with a device; touch the name of the device.
5
You may be prompted to enter a password to authenticate. Enter the
same password on both devices, or enter the password provided by
the device manufacturer. Ensure that you read the documentation of
the pairing device to check if it requires a default password.
6
When the pairing is successful, paired but not connected devices are
displayed under the “ PAIRED DEVICES”.
NOTE
1. The message indicating successful pairing may vary depending on the type of the
paired device.
2. Pairing is a one-time process. Once your device successfully pairs with another device,
your device recognizes that device without the need to re-enter the password.