VIEWSONIC Smart Display VSD220 - Manual (Page 47)

Protecting Your VSD220 Smart Display
37
2
Touch Screen Lock section.
3
Enter the password you have configured.
4
Select None secured to disable the password; select Password to
change the password.
NOTE
• Once the screen lock is secured with Pattern, FaceUnlock, Pin and Password, the Au-
tomatically lock will appear under Screen lock. By default, it is set to 5 seconds after
entering sleeping mode.
7.5 Power Saving Feature
In order to save energy,this device supports power saving mode (sleeping
mode). The device will enter power saving mode when you idle without
processing. Then, the screen will go off. You can set the duration of screen
to remain on before entering sleeping mode, touch the Home button │ Apps
button │ Settings │ Display │ Sleep.
7.6 Power Management Information
Please turn of the product when it will not be used for long time. This could
potentially increase the life and decrease the power consumption of the
product.
Power Indicator
LED Status
Power ON Green
Power Standby Orange
Power OFF LED OFF
Power On – In off mode, push the power button 1-2 seconds to enter power
on mode
Power Standby – In power on mode, push the power button to enter standby
mode
Power Off – In power on mode, push the power button more than 4 seconds
and select “OK” in the dialog box to enter off mode.