Verbatim MediaStation Pro Wireless Network Multimedia Hard Drive - Manual (Page 18)

18
① Turn on MediaStation Pro and press [SETUP] on Mode Selection screen.
6.3 Network Setup
It is possible to obtain an IP address automatically from DHCP Server or IP Router, or set the specifi c IP address. Check your network
environment.
✓ Note
DHCP On: You can use this option when it is possible to obtain IP address automatically from DHCP Server or IP Router. (Recommended for most users)
DHCP Off: When it is not possible to obtain IP address automatically or you connect to your PC directly without DHCP Server or IP Router, you have to use this option. Just write IP address
and Subnet mask.
‘DHCP Support On’ Setup Procedure
② Move to ‘Network’ icon and press [OK]. Setup box will be displayed under icon menu.
③ Select ‘DHCP Support-ON’ and press [OK].
④ Finally, press [SETUP] again for saving configuration..
✓ Check the obtained IP address
Press [INFO] on Mode Selection screen, and you will see the current IP address obtained
from the DHCP
④ Move to ‘IP Address’, ‘Subnet’ and press [OK]. Input box will be displayed, enter
number with [Direction] button or [Number] button. Finally, press [ENTER] for saving
configuration.
✓ Check the obtained IP address
Press [INFO] on Mode Selection screen, and you will see the current IP address obtained
from the DHCP server.
① Turn on MediaStation Pro and press [SETUP] on Mode Selection screen.
DHCP Support OFF Setup Procedure
② Move to the ‘Network’ icon and press [OK]. Setup box will be displayed under icon
menu.
③ Select ‘DHCP Support-OFF’ and press [OK].