Verbatim MediaStation Pro Wireless Network Multimedia Hard Drive - Manual (Page 23)

23
How to setup
① Make “skin1” folder and save “GUI” or “Images” in the folder at the root directory in a
HDD of MediaStation Pro
③ Now you see the changed GUI.
If you can not see the font, then change the font color.
(Setup Page => SKIN=> Change Font Color)
① After turn MediaStation Pro on, press [SETUP] button and go to [SETUP] page.
② At Setup page of SKIN, select [ON] of [SKIN Support] and select [SKIN folder]. Press
[SETUP] button for saving the configuration.
④ As the above, it supports several font colors.
② Go to the 2nd page and select [ETC] icon and press [ENTER] button then you will get
the above page.
③ By using arrow buttons, go to the bottom setup.
By using arrow & number keys, set the configuration and press [ENTER] for saving of the
configuration.
④ Press [SETUP] button for the saving of the configuration.
6.14 ETC
Here you set up a number of miscellaneous features; sound effect, screensaver and loading message.
How to setup