Vizio 210C - Manual (Page 113)

1
2
3
4
5
6
7
8
9
10
11
12
6-21
1
Press the PROGRAM key to enter the programme
menu, and press the TOTAL COUNTER key.
- If the key for the desired function is not shown, press the
Pre key or the Next key to switch the display.
This function displays the total number of copies.
The total counter is a cumulative counter. You cannot clear this counter.
- The total number of copies or prints of the copier is dis-
played classified by the colour mode.
9. TOTAL COUNTER
The total number of copies or prints (with the optional printer
controller installed) is displayed by size group. Each group
of the default setting is defined as follows (ask your service
technician for details):
- Small: A4, A5, A6, B5, LT, ST, and paper with less than
330mm width in the R direction
- Large: A3, B4, FOLIO, A3-wide, LD, LG, COMP, non-stan-
dard size paper with size unknown, and paper with 330mm
width or over in the R direction.
- The counter value can be either “Sheet” or “Count” depending
on the contract.
- The screen on the right is displayed when the printer control-
ler (option) is installed.