Vizio 210C - Manual (Page 32)

1
2
3
4
5
6
7
8
9
10
11
12
2-6
HOW TO MAKE COPIES
The paper size of the cassettes of the copier can be changed. The cassettes can also be set for THIN,
THICK1 paper or OHP films.
* Bypass copying
Page 6-5
1
Pull out the cassette toward you.
2
Push the lever of the side guides in the direction of
the arrow, and set the side guides at the desired pa-
per width (indicated on the bottom surface of the
cassette).
3
Push the lever in the direction of the arrow, set the
back guide to the desired paper size (indicated on
the bottom surface of the cassette).
4
Place paper in the cassette. Page 9-3 (step 2)
2. SETTING COPY PAPER (Cont.)
Changing the Paper Size of the Cassette / Setting the Cassette for Special Uses
6
Install the cassette into the copier.
7
Press the PROGRAM key to enter the programme
menu. Then press the CASSETTE key.
5
Adjust the size mark plate to match with the size of
paper that has been set.