Vizio 210C - Manual (Page 23)

1
2
3
4
5
6
7
8
9
10
11
12
1-9
If the following message remains displayed,
Enter access code
the access code you have entered may be incorrect. Key in the
correct code.
If the department control function is in use, be sure to press the ACCESS CODE key on the control
panel after finishing copying. The display returns to the access code input screen and the department
management function will remain active.
After Copying is Finished
1
When the department management function is in
use, the screen shown on the right appears imme-
diately after the power switch is turned on.
- The same screen is displayed when the ACCESS
CODE key is pressed or the automatic function clear mode
is activated.
2
Key in a registered access code (5-digit).
- The copier will be ready for copying.
Controlling the Use of the Copier with Access Codes
With the use of access codes, you can restrict copier users as well as manage copy volumes made by
individual groups or departments of your company.
* Registering, changing and deleting an access code
Page 6-24
* The access codes and the key copy counters ( Page 1-10) cannot be used together.