2 quick setup, Table 3-1 . installation overview, Quick setup – Vidikron PLASMAVIEW VP-6500VHDA User Manual
Page 29: Pre l iminar y
Vidikron PlasmaView VHD Installation/Operation Manual
17
PRE
L
Y
3.2
Quick Setup
Table 3-1 gives a quick overview of the PlasmaView VHD installation process. The sections
following this one provide detailed instructions.
Installation should be performed by a qualified custom video installation
specialist.
Table 3-1. Installation Overview
Step
Procedure
For Details, refer to
page...
1
Mount the PlasmaView VHD on a wall or table stand
2
Connect the
VHD Controller
to the PlasmaView VHD
3
Connect signal sources to the
VHD Controller
4
Connect external controller to
VHD Controller
RS-232 port
(optional)
5
Apply power to the PlasmaView VHD
6
If using the PlasmaView VHD with a computer, adjust
computer display properties
7
Display calibration: adjust the following for analog inputs;
save settings when finished:
• Aspect ratio
• Brightness
• Contrast
• Color level
• Tint
• Sharpness
• White Balance
8
Repeat Step 7 for digital inputs
Note