Vidikron PLASMAVIEW VP-6500VHDA - Manual (Page 69)

Serial Communications
Vidikron PlasmaView VHD Installation/Operation Manual 57
PRE
L
IMINAR
Y
Picture Adjust Commands (not available on HDMI 1 or HDMI 2 inputs)
BRIGHTNESS -100/100 YES Sets a value for brightness
BRIGHTNESS? NA NA Returns brightness setting value
CHROMADELAY -12/12 YES Sets a value for input color chroma delay
CHROMADELAY? NA NA Returns input color chroma delay setting
COLOR -100/100 YES Sets a value for color
COLOR? NA NA Returns color setting value
CONTRAST -100/100 YES Sets a value for contrast
CONTRAST? NA NA Returns contrast setting value
FILMMODE 0/1 YES Sets Film Mode off (0) or on (1)
FILMMODE? NA NA Returns Film Mode setting (0 = off; 1 = on)
FILTER 0/15 YES Sets a value for input color noise filter
FILTER? NA NA Returns input color noise filter setting
PHASE 0/3 YES Adjusts phase
PHASE? NA NA Returns phase setting value
SHARPNESS -6/6 YES Sets a value for sharpness
SHARPNESS? NA NA Returns sharpness setting value
TINT -100/100 YES Sets a value for tint
TINT? NA NA Returns tint setting value
Memory Preset Commands
CUSTOM1 NA YES Loads “Custom 1” image preset
CUSTOM2 NA YES Loads “THX” (“Custom 2”) image preset
PRESET? NA NA Returns currently-selected preset
(ISF Day, ISF Night, Custom 1 or
THX/Custom 2)
DAY NA YES Loads “ISF Day” image preset
NIGHT NA YES Loads “ISF Night” image preset
Table 6-1. Serial Commands (continued)
Command
Parameter
(min/max)
Value
Stored?
Description