ViewCast Osprey-450e - Manual (Page 21)

Osprey 240e/450e User Guide
ViewCast 15
The Input tab has the following controls.
Video Input The Video Input section of the tab allows you to select the video
signal source.
Video Present This indicator is enabled when video is present.
Video Standard The Video Standard allows you to select the standard different
countries or geographical areas use (Figure 10) from the drop-
down list.
Input Format This control works with digital cameras routing through the
Osprey’s card’s analog input.
VideoCheck This button opens a simple video monitoring window.
VideoGraph This button launches a vectorscope/lumascope utility.
VbiGraph This button opens an applet that displays the raw waveforms of
the video’s Vertical Blanking Interval (VBI).
OK Click OK to accept the settings.
Cancel Click Cancel to reject the settings and close the window.
Apply Click Apply to apply the settings.
Help Click Help to access the user guide.