ViewCast Osprey-450e - Manual (Page 31)

Osprey 240e/450e User Guide
ViewCast 25
The Video Decoder tab has the following controls.
Video Standard Select the video standard
Signal Detected When the card does not detect the input signal, this field displays a 0.
When the card detects the input signal, it displays 1.
Lines detected This field displays the number of lines the card detects in the input
signal.
VCR Input This field is a DirectShow feature that is not implemented.
Output Enable This field is a DirectShow feature that is not implemented.
OK Click OK to accept the settings.
Cancel Click Cancel to reject the settings and close the window.
Apply Click Apply to apply the settings.
Help Click Help to access the user guide.